Home > ubuntu > Setting Static IP in Ubuntu Terminal

Setting Static IP in Ubuntu Terminal


terminal

terminal

Open your Ubuntu’s Terminal, then issue the command:

sudo /etc/network/interfaces

after hitting ENTER key this will ask for your root or admin password; adjust it to your needs (in this example setup I will use the IP address 192.168.0.100):
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback

# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
script grep
map eth0

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1

About these ads
Categories: ubuntu Tags:
  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.
Follow

Get every new post delivered to your Inbox.

%d bloggers like this: